Photon G Multi-Cutter Blade – 5" & 6"

The Photon G is a professional multi-cutter built for stone, concrete, and masonry work where simply making the cut isn't enough. Its sintered diamond matrix is engineered to cut and grind granite, quartzite, engineered stone, concrete, and brick, while the diamond-covered face lets you shave, shape, bevel, sand, and fine-tune material with the same blade.

A Countertop Installer's Workhorse

Photon G really shines during countertop installation. Need to cut out or enlarge a cooktop opening, then shave an edge so the countertop drops perfectly into place? Need to take a little material off around a wall, cabinet, appliance, or uneven opening? Cut it, check the fit, then use the face of the same blade to make controlled adjustments.

Instead of carrying separate blades for cutting and grinding, Photon G handles many of the corrections installers run into every day. For granite, quartzite, and engineered-stone installations, this could easily become one of the most-used blades on your install truck.

Cut It. Then Make It Fit.

The value of Photon G is the ability to keep working after the initial cut. Bevel an edge, round a corner, knock down a high spot, or shave away material until the piece fits exactly where you need it.

Run into leftover concrete protruding from a wall or opening? Photon G can cut and grind concrete too, giving installers another reason to keep one close by.

A Hidden Gem for Landscape & Hardscape Crews

Photon G isn't just a fabrication blade. It is an incredibly versatile field tool for contractors working with natural stone, concrete, and masonry.

Use it for rough-cut stone stairs, landscape stone, retaining-wall material, concrete pavers, brick, and other hardscape applications. When a stone or boulder needs to fit tightly into a wall or landscape feature, Photon G lets you make the initial cut and then shave and shape the material from angles that can be difficult to approach with a conventional segmented cutting blade.

That ability is especially valuable with irregular natural stone, where the job rarely ends with one perfectly straight cut. Shape the stone, adjust the fit, knock down projections, and continue refining it without constantly changing tools.

For landscape and hardscape professionals who haven't discovered multi-cutter blades yet, Photon G is a serious hidden gem. Once you see how useful the cutting-and-shaping combination is in the field, it's the kind of blade that earns a permanent spot in the truck.

Built for Field or Shop Use

Photon G can be used wet or dry and is available in 5" and 6" diameters. Its flush-cutting quad adaptor design keeps a traditional lock nut from interfering with close cutting and grinding, giving you better access when working along edges or in tight areas.

Whether you're fitting countertops inside a home, making corrections in the fabrication shop, grinding concrete, or shaping natural stone in the field, Photon G gives you something a conventional cutting blade can't: Make the cut, then make it fit.

Features

• Available Sizes: 5" and 6"

• Wet or Dry Use: Designed for wet or dry cutting, grinding, shaping, and field adjustments.

• Material Compatibility: Specifically bonded to cut and grind granite, quartzite, engineered stone, concrete, clay and Saltillo tile, block, brick, and natural stone.

• Flush-Cutting Design: Quad adaptor hub allows for flush cutting and grinding without a traditional lock nut getting in the way.

• Flange: Includes flange and four mounting bolts.