Diamax Super Cyclone Porcelain Blade reinforced core 14in to 16in
Diamax Super Cyclone Porcelain Blade reinforced core 14in to 16in
By Diamax
- SKU
- : CUSU14
In stock
BladeRunner Product Overview
The Diamax Super Cyclone Porcelain Blade is a high-speed bridge saw blade built for porcelain and ultra-compact materials such as Dekton, Neolith, StonePeak, and Laminam. Its thin diamond segment and reinforced core are designed to produce fast, clean straight cuts while maintaining the stability needed for precise miter work.
- Built specifically for porcelain, Dekton, and ultra-compact surfaces
- 15% thinner segment for faster cutting and a cleaner finished edge
- Reinforced core provides added stability for straight and miter cuts
- Factory-dressed cutting edge is ready to run without initial dressing
- High-quality diamond bond helps produce sharp, clean edges in dense materials
- Category 5 cutting performance with recommended speeds up to 80" per minute
- Wet cutting only for proper cooling and consistent blade performance
BladeRunner Expert Insight
Why We Like It:
The Super Cyclone is built around one thing: getting clean, fast cuts in porcelain and ultra-compact material without giving up stability. The thinner segment cuts with less resistance, while the reinforced core helps keep the blade tracking straight during both straight and miter cuts.
Best Use:
Best for bridge saw cutting of Dekton, porcelain slabs, Neolith, Laminam, StonePeak, Techlam, and other ultra-compact surfaces where edge quality and miter accuracy matter.
Pro Tip:
Take advantage of the blade's speed, but don't rush entry and exit. Diamax recommends reducing the feed rate to about 70% when entering and leaving the slab, especially on brittle porcelain and ultra-compact materials. Plenty of clean water is also critical for keeping the thin segment cool and the cut clean.
When We Wouldn't Choose It:
If your shop mainly cuts granite, engineered quartz, or quartzite, we would usually choose a blade developed specifically for those materials. The Super Cyclone can handle a wider range of stone, but its real advantage is porcelain, Dekton, and other ultra-compact surfaces.
BladeRunner Recommends
-
Best For:
Fabrication shops cutting porcelain slabs, Dekton®, Neolith, Laminam, StonePeak, and other ultra-compact materials on a bridge saw.
-
Why It Stands Out:
The Super Cyclone combines a thin diamond segment with a reinforced core, giving you faster cutting with the stability needed to hold a clean line through brittle porcelain and ultra-compact slabs.
-
What You’ll Appreciate:
Clean straight cuts, controlled miter performance, less cutting resistance, and a factory-dressed edge that is ready to run without an initial dressing process.
-
BladeRunner Take:
This is one fast ultra compact bridge saw blade. We have seen shops push well above 100 inches per minute with this blade. If porcelain, Dekton, or other ultra-compact materials are a regular part of your workload, the Super Cyclone is a strong production blade to keep on the bridge saw. Its real advantage is combining speed with the core stability needed for clean edges and accurate miters. If you need a porcelain blade that is a little more forgiving and slower speeds, go with the Cyclone Ultra Gold blade.
Need Help Choosing?
Our diamond tooling experts are available to match the correct blade and matrix to your workshop machinery.
Mon–Fri 8AM – 5:30PM MST
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Product Description
Diamax Super Cyclone 14″–16″ Porcelain Blade
Professional-Grade Diamond Blade for Ultra-Compact Surfaces
The Diamax Super Cyclone 14″–16″ Porcelain Blade is a premium, professional-grade segmented diamond saw blade engineered for high-performance wet cutting of ultra-compact surfacing materials, including porcelain, Dekton, Neolith, and similar engineered stone products.
Designed for use with bridge saws in fabrication shops, this blade delivers precise, efficient, and clean cuts while maintaining exceptional durability and cutting consistency.
Engineered for Superior Cutting Performance
Constructed with premium diamond segments and a reinforced steel core, the Super Cyclone Porcelain Blade is optimized to handle the hardness and density of ultra-compact surfaces, providing superior performance over standard blades.
Its segmented design promotes:
-
Effective water cooling
-
Efficient debris removal
-
Reduced heat buildup
-
Extended blade life
The result is smoother, more accurate cuts with minimal chipping — ideal for high-end countertops, wall panels, and detailed fabrication work.
Versatile for Straight and Miter Cuts
The blade excels in both:
Straight-Line Cutting
Mitered Cutting
Its robust construction ensures stability and precision during repetitive cutting operations, allowing fabricators to achieve consistent, professional-grade results across multiple projects.
Wet Cutting Optimization
Engineered exclusively for wet cutting, the Super Cyclone Porcelain Blade:
-
Minimizes dust
-
Preserves segment integrity
-
Enhances cutting performance
-
Produces clean edges and superior surface finishes
It is a reliable tool for professional stone fabricators, countertop shops, and tile installers who demand speed, accuracy, and long-lasting performance in high-volume or precision applications.
Key Features
Professional Diamond Construction
High-quality diamond segments engineered for precision and long life when cutting ultra-compact and porcelain materials.
Thinner Segment Design
Approximately 15% thinner segments help achieve faster, cleaner cuts with reduced material waste and improved finish quality.
Reinforced Core
Offers stability and durability during demanding cutting jobs, with reliable performance on hard materials.
Wet Cutting Only
Designed for use with water feed to control heat, reduce dust, and extend blade life.
Broad Machine Compatibility
Arbor size and design fit many bridge saws using 50/60 mm arbor standards.
Specifications
Blade Specifications
-
Blade Diameter: 14″–16″ (≈406 mm)
-
Segment Height: ~10 mm
-
Arbor / Bore: 50 / 60 mm
-
Intended Use: Wet cutting of porcelain & ultra-compact surfaces
-
Max RPM: ~2200–2400 RPM (typical for this size)
-
Materials Cut: Dekton, Neolith, Laminam, porcelain, ultra-compact stone
Product Variants & Performance Data
CUSU14 – 14″ Porcelain Blade
-
Segment Height: 10 mm
-
Arbor: 50/60 mm
-
Max RPM: 2400
-
Straight Cutting Speed: 80″ / min
-
Miter Cutting Speed: 48″ / min
CUSU16 – 16″ Porcelain Blade
-
Segment Height: 10 mm
-
Arbor: 50/60 mm
-
Max RPM: 2400
-
Straight Cutting Speed: 80″ / min
-
Miter Cutting Speed: 48″ / min
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!
Verified Buyer Reviews
Be the first to review this product
Share your experience and help other customers make the right choice.
Something exciting is on the way
We're putting the finishing touches on this section to bring you a better experience and more useful information. Check back soon!